Dremel Idea Builder 2.0 3D Printer Core Unit

Be the first to review this product


Quick Overview

 Dremel 3D Idea Builder 2.0 3D Printer, Wi-Fi Enabled with Guided Leveling Core Unit

Expand your creativity by building your own prototypes or take a hobby to exciting new levels. Design or personalize items that reflect your own individuality. Satisfy your desire to challenge your mind, while inspiring others to explore their version of 3D possibilities


Key Features:

  • Clear Cover
  • Advanced Motion Control
  • Ehanced Cooling System
  • Expanded Build Function
  • On-Board Software
  • Innovative Extruder including active filament monitoring
  • Enclosed 3D Creation Area
  • Removable Building platform
  • Guided Two Point Leveling System
  • Network enabled WIFI & Ethernet

Includes convenient features like WiFi connectivity and a cloud-based software, you now have the freedom to print remotely. It allows you to print, monitor progress, and assign new users to the printer.

The new Idea Builder comes with an innovative clog-resistant extruder to protect your models from failed builds. With our 1 year warranty and our UL safety certification, you can rest assured that your Idea Builder is safe and reliable to use.

The new 2 point assisted leveling will allow for fast and accurate calibration so you can start building on right away. Dremel Idea Builder 3D40 comes equipped with a pre-installed extruder, unlike other 3D printers that require you to install it yourself. All that while our expanded build plate is designed to fit objects up to 10”x6”x6.7” so you can create bigger projects.

General Product Info

  • Extruder: Single extrusion
  • Extruder temperature: Up to 230°C /397°F
  • Operating Interface: 3.5” full color IPS touch screen
  • Maximum Build Volume: 10” x 6” x 6.7” / 255 mm x 155 mm x 170 mm
  • Layer Thickness: 4 mil | 0.004 inches 100 microns | 0.10 mm
  • USB Stick: Up to 64GB
  • Internal Storage: 4GB
  • Dimensions
    • Height: 20.25 inches (514 mm)
    • Width: 16 inches (406 mm)
    • Depth: 15.9 inches (403 mm)
  • Weight(without spool)
    • 35 pounds (16 kg)


    • ONLY builds Dremel PLA filaments
    • Filament: 1.75mm PLA (Blodegradable/Renewable)
    • All polymers degrade with time. The following conditions ensure the material remains high quality:
      • Do not unpack until filament is needed
      • Store at room temperature: 16-29° C / 60 - 85° F
      • Store in a dry environment


      • Dremel 3D40 comes with complimentary software. This application converts your 3D digital files into buildable model files.
      Windows Requirements
      • Print Studio Software runs on 64-bit Operating Systems Windows 7 or later
      MAC OS X Requirements
      • Print Studio Software runs on Mac OS X v10.10 (Yosemite) or later


      • A PC with the below minimum requirements will be required to run the Print Studio Software
        • Processor: Multi-core processor - 2 GHz or faster per core
        • System RAM: 2 GB
        • Screen Resolution: 1024x768
        • USB Port
        • Video Graphics Card to support OpenGL 2.1 or later
        • 3D40 input rating: 100V - 240V, 50/60Hz 0.8A - 1.8A


        • Room Temperature: 16-29° C (60 - 85° F)
        • Level workspace
        • Dry workspace environment


        • One year warranty for non-commercial use
        • 60 day warranty for commercial use