MakerBot METHOD X RapidRinse and ABS-R Filament 9 Pack (6 ABS-R, 3 RapidRinse)
Print dimensionally accurate ABS parts with all the ease of PLA. The ABS–R filaments provide improved performance (and reliability) over normal ABS. It works exclusively with RapidRinse—a proprietary tap water-soluble support material that dissolves faster.
Compatible with:
Get to Know:
ABS-R + RapidRinse Fast Dissolving Support Material
Print dimensionally accurate ABS pieces with all the ease of PLA. The ABS-R filaments provide students with key performance and reliability improvements over normal ABS. It is exclusively compatible with RapidRinse—a proprietary tap water-soluble support material that dissolves even faster. With this STEM bundle, you can sample all three color options of ABS-R and RapidRinse and get started quickly!
ABS, Finally as Easy as PLA
ABS is one of the most in-demand yet difficult materials to use in 3D printing. The METHOD X and its patented VECT™ 110 technology, combined with the proprietary RapidRinse™ support, enables students to create incomparable ABS parts with unprecedented ease.
Tap Water Soluble
Forget the cumbersome wash tanks and all the chemicals—the RapidRinse™ filaments dissolve in pure tap water so it is easy to use them in just about any environment. With this bundle, you can sample all three color options and get started quickly!
Dissolves in Minutes
You don’t have time to wait around while your various prints dissolve, so the RapidRinse™ materials are engineered to dissolve even faster than PVA and competitive high-temp, dissolvable support materials. There is really nothing that comes close.
What's in the Box:
- 3 Spools of RapidRinse filament
- 6 Spools of ABS-R filament
- 1 Roll of Build Tape
Note: In the fall of 2022, MakerBot and Ultimaker, two of the leaders in desktop 3D printing, merged to form the new 'UltiMaker' brand.
Technical Specs
ABS-R
COMPATIBILITY
Printers:
- METHOD X
- METHOD X Carbon Fiber
Extruders:
- Model 1C Extruder
- Model 1XA Extruder
- LABS GEN 2 Experimental Extruder
SPOOL TYPE
Smart Spool™ provides valuable information directly to the MakerBot Print platform, including material types, color, and the amount remaining, via an RFID chip, while a desiccant in the spool maintains a low moisture level inside the drawer bay.
DIMENSIONS AND WEIGHT
Spool Diameter: 21.8 cm (8.6 in)
Shipping Weight: 1.1 kg (2.4 lb)
Materials Diameter: 1.75 mm
Spool Width: 4.2 cm (1.65 in)
Net Weight: 0.65 kg (1.43 lb)
STORAGE ENVIRONMENT
Store in the included vacuum-sealed metalized polyester bag to avoid any moisture absorption from air; long-term exposure to humidity can compromise material quality and performance. Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process.
MATERIAL PROPERTIES
|
Properties |
Test |
ABS-R |
|
Tensile Strength (MPa) |
ASTM D648 |
41 |
|
Tensile Modulus (MPa) |
ASTM D648 |
2400 |
|
Strain at Yield (%) |
ASTM D648 |
2.3 |
|
Strain at Break (%) |
ASTM D648 |
33.4 |
|
Flexural Strength (MPa) |
ASTM D790 |
79 |
|
Flexural Modulus (MPa) |
ASTM D790 |
2600 |
|
Izod Notched Impact Strength (J/m) |
ASTM D256 |
129 – C/H |
|
Izod Unotched Impact Strength (J/m) |
ASTM D256 |
970 - C |
|
Heat Deflection Temperature – 64 psi (C) |
ASTM 648 |
105 |
|
Heat Deflection Temperature – 264 psi (C) |
ASTM 648 |
102 |
RAPIDRINSE
COMPATIBILITY
Printers:
- METHOD X
- METHOD X Carbon Fiber
Extruders:
- Model 2XA Extruder
SPOOL TYPE
Smart Spool™ provides valuable information directly to the MakerBot Print platform, including material types, color, and the amount remaining, via an RFID chip, while a desiccant in the spool maintains a low moisture level inside the drawer bay.
STORAGE ENVIRONMENT
Store in the included vacuum-sealed metalized polyester bag to avoid moisture absorption from the air; long-term exposure to humidity can compromise material quality and performance. Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process.
DIMENSIONS AND WEIGHT
Spool Diameter: 21.8 cm (8.6 in)
Spools Width: 4.2 cm (1.65 in)
Material Diameter: 1.75 mm
Net Weight: 0.45 kg (1.0 lb)
| Manufacturer | Makerbot |
|---|
